Ahresty Techno Service Corporation
Ahresty Techno Service Corporation has, since its establishment in 1985, maintained a steadfast dedication to providing machinery that enables customers to raise productivity, reduce cost, and improve quality gaining the strong support of customers.
Products
Die Cooling Equipment
Cooling of small diameter core pins Cooling control of areas in a die where soldering, shrinkage porosity, or pressure leakage tends to occur. The system is provided with a high-pressure cooling pump an over-cooling prevention control circuit etc.
Filter for Cooling Water
Attached to the inlet of Jet Cool System, or Water Softener, it removes dirt, sand, slime etc. to prevent clogging of the cooling water channels.
Cooling Water Treatment
Water softener separates and removes the minerals (calcium, magnesium) that are contained a lot in tap water and industrial water.
Water Flow Detecting Device
Flow watcher is a device to detect and signal the water flow condition of cooling pipe. Please make full use of Flow Watcher for an early discovery of the cooling troubles as described below by using in combination with an appropriate optional apparatus.
Flow Meter
This is the device to monitor and judge the fluctuation of high-pressure water flow rate which JECSS discharges. This is upper―grade model of Flow Watcher, however it makes it possible to comprehend fluctuation of water flow rate. The trend graph of water flow rate is automatically created and it makes it easier to see the trend of water flow rate.
Water Flow Confirming Device
This is a device to visually check the flow of die-cooling water.
Cooling Pipe with Thin Channel
This is a small-diameter cooling tube specially made for a Jet Cool System. The tube can be inserted in a slender core pin, which was formerly not possible. It can be used effectively for the prevention of soldering, pressure leakage, and shrinkage porosity.
Die Cooling Pipe
This is a die cooling tube made of either steel or stainless steel. For installation, both screw type and O-ring type are available. The structure is strong against breaking or bending. Steel tubes are zinc-coated to prevent rusting. Many variation of hose connecting ports are available. The head consists of different types to meet all requirements : head for 2-way channels (F type), head for 1-way channel (L type) and revolving head (H type).